1 / 1
Track Square for Milescraft Track Saw Guide for Left Blade Circular Saws
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A track square for the Milescraft Track Saw Guide, but for circular saws with left-side blades.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 0
- Views
- 520
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Not much has changed from the @CurlyFriesALPHA original, except for the orientation of the angle and the second t-slot.
Files: an editable .step file, a .3mf file for Bambu Studio, and a .stl file in case you like that better.
Print Settings: I printed on a Bambu P1S with 0.4mm nozzle using Bambu Studio. The following settings prioritize speed, but it still seems incredibly strong. Overall print time was just under 4 hours.
- Bambu PETG HF using manufacturer defaults.
- 0.28mm Extra Draft @BBL X1C preset
- 0.28mm layer height (0.2mm initial)
- 0.42mm default line width (0.5mm initial, 0.45mm for inner wall, top surface and sparse infill)
- 10% sparse infill with grid pattern.
- Tree supports using Bambu Support for PLA filament on interfaces only.
- I checked Support Critical Regions Only to save many hours of print time.