1 / 17
RCRUN Toyota LC80 - Body Parts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More details for a monotone body. Read the description.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 95
- Makes
- 0
- Views
- 739
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
General Description:
- This body is a gigantic pile of smooth plastic. It needs some refinement.
- To mount the body on an HPI Venture there are also body mounts available here on my Printables Site.
- L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer.
Part Description: Rear Side Window Equipment Rack / RotopaX
- Printed in PLA 25% fill.
- Was attached to the rear window with 2.5mm RC4WD scale screws.
To do this, drill 2mm holes through the body. Screws are difficult to get in but no nut is needed. - The petrol canisters can be downloaded here for free.
Part Description: Simple Dash Board
- For those who find the original interior too expensive, I have a simple dashboard.
- Print out all the parts and glue the parts together.
- The steering wheel is attached to the dashboard with a long M3 screw and the printed tube.
- Dashboard is attached to the body at the original points with self tapping screws.
- If you like to have the steering wheel on the other side, you can simply mirror the file in the slicer.
Part Description: Hood Rack Board Guard Cover
- A little more detail for that huge hood.
- Printed in 25% PLA.
- For the other side, mirror it in the slicer.
- The anchors are glued to the board.
- Connected to the body with 2.5mm RC4WD scale screws. Pre-drill 2mm holes and no nuts are needed.
Part Description: Running Board
- A small detail that makes the body more interesting.
- Boards were printed with PLA 25% infill.
- Must be glued to the body.
- Sticker is not part of the file.