1 / 13
SV07 and SV07+ 5015 Tri-Horn Parts Cooler — image 1
1 / 13

SV07 and SV07+ 5015 Tri-Horn Parts Cooler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a game changer for part cooling on the SV07 and SV07+ printers.

Rating
5 / 5
Likes
16
Downloads
57
Makes
0
Views
367
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Not satisfied with the curtain fan on my SV07+, I had to come up with something that would actually work. The OEM curtain fan was too loud and caused me countless failed prints due to excessive cooling on the bed causing prints to warp up. I upgraded to a 120MM curtain fan but still wasn't happy with it, so I Frankensteined this monstrosity together in Tinkercad. Multiple iterations later I finally have it where I am happy to share it.  

Yes, I know it's ugly.  Could it be cleaned up to look better? Sure.  Could someone redesign it better with more skills than I have in Tinkercad? You better believe it.  

But the real question, does this thing actually work? Absolutely!!!   

With just this parts cooler along I regularly run my SV07+ at 200-250mm/s with Voxelab PLA+. No curtain fan even mounted to the printer and get fantastic print results. Overhang's are a dream to print up to 60 degrees before the print quality starts to really degrade and will hit 80 degrees without supports. Bridging quality simply is amazing with it.  Even the longest spans print really well. 

I printed it with QIDI Tech PET-CF for easy printing, durability, and most importantly outstanding heat resistance. The original version has several hundred of hours of print time on it with no warping, deformation, or other issues. For those who don't want to print with ABS, this material is AMAZING! 

Post print processing is minimal, but you may need to trim the tri-horn mount base depending on what the outlet of your 5015 fan is like so it will fit. You may also need to open the mounting holes up on the Tri-Horn Mount where the parts cooler bolts to it, the holes are a little small and I forgot to fix that.  

 

Additional parts needed:

4 M3 x 6 screws

2 M3 x 25 screws

4 flat washers (spacers for fan mount)

2-4 M3 nuts to mount the 5015 fan 

 

Print settings. 

PET-CF:  bed 85c, nozzle 285c, cooling at 15% after 3-4 layers. 

0.4 Nozzle

Layer height 0.20mm

Infill: 50-80% 

Perimeters 5-6

Top/Bottom layer count: 5

Use an exterior brim only and supports just for the interior bridging since PET-CG doesn't like part cooling. These are my settings for easy to remove supports, even with PET-CF. 

Type: Normal

Style: Snug

First layer: 90%

Expansion: 2mm

Top Z:  0.18 mm

Bottom: 0

Base pattern: Rectiliniar

Spacing: .5mm

Top interface layers: 5

Interface pattern: Grid

Top interface space: 0.2mm

 

This version was designed this version to work with specifically with a BLTouch probe and the mount linked below. It will not work with the stock induction probe, but someone who is moderately good with Tinkercad or other modeling software could easily adjust it to work with the stock probe if needed. 

https://www.printables.com/model/1001353-bl-touch-mount-for-sv07-plus-and-sv06-plus

Hopefully this works as well for you as it has for me. 

 

Tags