KITCHEN SINK MIXER ADAPTER
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.57 – €0.69 net (excluding VAT)
For file: Spanner_0.1mm_PETG_MK3S_50m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 49.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple adapter to allow a spray fitting to be fitted to a standard kitchen tap (faucet) aerator.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 80
- Makes
- 0
- Views
- 692
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Kitchen sink fittings don't have consistent thread sizes, so when a friend wanted a spray attachment for his sink mixer - this is what happened!
It may or may not fit your tap, but if you are prepared to waste 4gms of filament to find out, here's how!
I've included gcode for PLA and PETG, I prefer the latter but both seem to work well enough sliced at 0.1mm (DETAIL) with supports only in the spanner slot - PrusaSlicer v2.4 does a super job of this.