1 / 4
4 inch Dust Port - Delta ShopMaster Jointer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to adapt between 4 inch dust hose and attach to Delta ShopMaster Jointer.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 110
- Makes
- 1
- Views
- 346
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This part is designed to adapt a 4 inch dust collection hose to the Delta ShopMaster Jointer.
OD of the dust port is 3.935" which fits a standard 4" hose.
No additional hardware is needed. Use the 4 screws on the jointer to attach the flange.
My Print Settings
- Filament: PETG
- Wall Loops: 3-4 recommended
- Nozzle: 0.6 mm
- Infill: 20% - Gyroid
Additional note: There is no specific purpose to the multicolored print in the photos. I ran out of black filament!