1 / 2
VESA 100mm * 100mm monitor mount 23mm offset spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer that offset your VESA 100mm*100mm mount 23mm to left/right/top/bottom
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
DO NOT PRINT THIS WITH PLA IT WILL SAG IF YOU USE PLA
You'll need four (4) m4 hex nut and some physical persuasion. The tolerance is tight.