ADXL345 nozzle mount for TZ 2.0 / bambulab hotends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ADXL345 nozzle mount for TZ 2.0 / bambulab hotends. Hole distance is 15mm for the sensor and clamps to the nozzle.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 215
- Makes
- 3
- Views
- 658
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a nozzle mount for my ADXL345 sensor and my bambulab-style nozzles. All models I found are for the V6 nozzles so I made one.
I printed the part in ABS with Voron settings and the magic 5 (5 walls, 5 top/bottom layers and 55% infill).
BOM:
3x Voron 3x4x5 M3 heat inserts
2x M3x6mm screw for mounting the sensor
1x M3x10mm screw for clamping to the nozzle
Remove the silicone heat sock before using the mount to clamp to the nozzle. Otherwise there could be to less surface for clamping.
The hotend has to be cold before using the mount!
EDIT:
2025-05-20 Added requested step file