Strong Ceiling Grid Hooks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang tight!.. Literally! 💪 A strong print to hang whatever you need from a standard ceiling grid! 👍
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 148
- Makes
- 1
- Views
- 936
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Yes, another ceiling grid hook but these are strong! 💪 There are multiple sizes available and I'd be willing to make more upon request. 😁 The hooks are printed in two halves and are joined with a “live hinge” which the halves fold together along. As you close the hinge, the ends clamp round the ceiling grid. Once set in place, make it permanent with a zip-tie! These are designed with just enough tolerance to slide along the grid even after being zip-tied in place.
Be sure to clip off the integrated supports (as shown in the GIFs) before mounting! ✂
Print the STLs as oriented.
I hope you find this print useful and please post your makes!
Material: PETG - Or stronger filament. PLA with deform over time.
Layer Height: 0.2mm - Lower for finer layer lines.
Perimeters/Walls: 3 - Add more for more strength.
Infill: 15% Cubic - Increase for more strength.
Brim: NO BRIM - This could interfere with the live hinge design.
Supports: NO SUPPORTS - Necessary supports are in the design. Clip off before use.
If you love this model, please consider Buying Me a Coffee or maybe send a tip via Cash App! ♥
https://buymeacoffee.com/claytr0n
https://cash.app/$claylinco