Taper / adaptor for Duplo / Hubelino compatible pillars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three adaptors to combine pillars of different widths.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 77
- Makes
- 1
- Views
- 202
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
These three adaptors allow the combination of my DUPLO compatible pillars of different widths. The visual appearance is inspired by a “Ground support” or “Truss tower” from Event / PA technology.
The pillars can be found here -
2x2 version: https://www.printables.com/model/1116708-duplo-hubelino-compatible-pillar-2x2-8-high
3x3 version: https://www.printables.com/model/1117844-duplo-hubelino-compatible-pillar-3x3-8-high
4x4 version: https://www.printables.com/model/1117870-duplo-hubelino-compatible-pillar-4x4-8-high
The adaptors sized 2x2 on top Pillar_3x3_2x2.stl and Pillar_4x4_2x2.stl will print without support. The adaptor Pillar_4x4_3x3.stl was printed with tree supports.