Tabletop wargaming constructable play area/ diorama tile set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A blank tile system I made for a easy to construct and move play area/box
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Noncommercial
The tiles are 150mm by 150mm with 10mm clip extruding.
The walls are 50mm high and add 10mm to each side. Endplates add 20mm to plate.
There are 2 systems, A 3 clip system I printed and tested for diorama purposes and a 4 clip system that is designed with the same tolerances.
While I have not printed the 4 clip system It has the advantage that the plates fit in any direction and only one wall type is needed.
For the best result print with a support interface material with 0 space between. PLA and PETG don't fuse together so use the other one as support interface material.