1 / 5
vesa 75 arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
made this to hang tv above my bed
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 33
- Makes
- 0
- Views
- 1,025
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
Because I' m not allowed to make holes in the walls of my dorm, I made this arm so I could bolt to my wardrobe.
The bolt holes are roughly 450mm apart.
All the wood beams and printed parts are connected with small 2.2x16mm screws.
Vesa 75 adapter and swivel plate are connected with small 2.2x16mm screws.
The hinges are connected with the M8 rod.
if u want to change the design:
the design is kind off a mess, good luck😋
printed parts:
- 2x hinge 1.1
- 4x hinge 1.2
- 1x hinge 2.1
- 2x hinge 2.2
- 5x hinge 3.1
- 6x hinge 3.2
- 1x elbow 1
- 1x elbow 2
- 1x elbow 3
- 1x swivel plate
- 1x vesa 75 adapter
wood:
- 1x 45x20x385mm
- 1x 45x20x129mm
- 1x 45x20x418mm
- 3x 45x20x405mm*
*the length of these doesn't really matter, you just need at least 2 at the same length
hardware:
- 37x screw din7981 2.2x16mm
- M8 threaded rod
- 8x M8 (lock)nuts
- 8x M8 washer