Playing Card Box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.20 – €5.13 net (excluding VAT)
For file: playing_card_box_015mm_pla_mk3s_4h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.66 excluding VAT (range midpoint).
- Weight reported by the author
- 52 g
- Print time reported by the author
- 4.97 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is yet another playing card box. It's a simple model, but quite functional.
- Rating
- 4.81 / 5
- Likes
- 410
- Downloads
- 3,894
- Makes
- 69
- Views
- 11,954
- Reviews
- 58
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is yet another playing card box. It's a simple model, but quite functional. In addition to providing a nice place to store cards, the base makes a great draw pile holder, and the top makes a great discard pile holder.
The spade-shaped hole at the top helps to prevent cards from sticking to the lid due to air pressure, makes a nice finger-hold for pushing cards out, and it's nice to see at a glance which set of cards are inside the box.
This one is sized perfectly for the Bicycle brand of 52 cards (with room to spare for jokers, etc.). The inside dimensions of this box are 64mm x 88.3mm x 20mm (plus an additional 0.3mm tolerance around the width and length). I've exported the design to STEP format and included it below in case you need different dimensions for your brand of playing cards. The construction is parametric, just update the variables for Width, Length, Height, Tolerance, and Radius to suit your needs.
Print instructions
Category: Games Print Settings
Printer Brand: Prusa
Printer: i3 MK3S
Rafts: No
Supports: No
Resolution: 0.15mm
Infill: 15% Gyroid
Filament: Amazon Basics / Overture PLA White
Notes:
Print the bottom and the top with the flat part against the print bed. It prints easily without supports.