Cooler Cup Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cup Holder using the slots on the end of many roto-molded coolers
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 73
- Makes
- 1
- Views
- 464
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model takes advantage of the slots on the end of the cooler. This one is sized for my RTIC 65qt cooler with a ratchet strap also in the slot, but likely will fit other coolers.
It has been sized to hold a 32oz/1000ml Nalgene Bottle, and will fit most bottles. The phone holder has been sized to hold most phones, but excessively large phone or cases may not fit (see pictures for fitment details - measurements are in inches).
There is two hanger models. The standard model is for most cooler applications. The extended version is to clear a ratchet strap mechanism, as shown in the pictures. For printing, I recommend increasing the perimeters on the hangers for increased strength.
See this model for the wheel attachment seen in the picture
To assemble, slide the “Cup Holder.3mf" onto the “Hanger.3mf” / “Hanger Extended.3mf” and then thread machine (I used a M3x16, but you can use up to a M3x38) screws into the three holes (Screws are not necessary, but they provide myself with peace of mind.