1 / 1
Spool Holder 130MM for 3KG rolls
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spool roller holder to help with 3KG rolls
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 115
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I have some larger rolls that do not roll well on the bar. I wanted to be able to handle the PTFE tube as well so I expanded the current setup.
I have printed with or without the supports. You may have some issues with the screws if you do not have a properly setup printer. Not to worry though you just need to make sure the screws are tight enough to not move. The 608 Bearings will handle the spinning.
Parts needed:
- 1 - Base
- 2 - Rollers
- 4 - Pins
Print settings:
- 20 % infill
- .20 Speed
- 4 walls
Purchase 608 bearings.
I used these because they were cheap.
https://a.co/d/h2Pa3cJ