1 / 9
WOODWERD TS55 SideSaddle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side saddle for Festool MFT table to hold a TS55 track saw off to the side and below the top plane.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 30
- Makes
- 0
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For this build, you will need to print 5 main parts and 4 MFT Nuts.
Parts:
3 Vertical arms (2 get assembled to make one long)
1 Arm / Brace
1 Base Plate interlocking part
8x M4 Inserts
8x M4 Bolts 10mm long
4x M5 Nuts and Bolts for MFT T-NUT
Additionally, you will need to use a ½" (12mm) Baltic Birch (ideally) to make the interlocking base plate. SEE attached DIM DRAWING
Parts have strong interlocking drafted faces to aid in structure and fitment.
After assembly Saw should be placed as an easy drop-in
