LagMaster - Parametric guide for cutting pipe insulation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Create a custom cutting guide for your specific diameter of pipe insulation
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 188
- Makes
- 0
- Views
- 699
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Here's a Fusion 360 Parameterized model for making your own Lagging tool.
To use this, you'll of course need to be running Fusion 360 and from there, all you need to specify is the diameter of your pipe insulation (in either metric or imperial) and the model will take care of the rest.
Here's a video I'd found, on how to use your Lagging tool:
There are specific transitions for the wall thicknesses and clearances, which are automatically set as follows for your specified pipe insulation diameter:
Wall Thickness:
Diameter is less than 70mm: 2mm thick walls
Diameter is larger than 70mm: 2.4mm thick walls
Clearance:
Diameters of less than 75mm: 1mm clearance
Diameters ≥75mm and <80mm: 1.8mm clearance
Diameters ≥80mm: 2.6mm clearance