1 / 6
AX1 antenna Clamp Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have created a C clamp bracket for the Elecraft AX1 antenna
- Rating
- 4.667 / 5
- Likes
- 57
- Downloads
- 407
- Makes
- 2
- Views
- 2,258
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I print mine in ASA filament. You can also print it in Petg. Infill needs to be 100%.
You will need a BNC female to female bulkhead connector
1 M4 x 18mm bolt with nut and washer
1 M4 x 16mm bolt with nut and washer
1 M4 thumb nut
14 gage striped solid wire to make the trace between the bnc base and the counterpoise post.
Wire sits in the groove.
Also added a ¼-20 fitting to one of the Clamp bodies. Some may like the feature.