Case for ESP12F_RELAY_X4 board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case designed to fit the ESP12F_RELAY_X4 board :)
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 566
- Makes
- 2
- Views
- 2,265
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a case I made for the ESP12F 4x relay board, like this one: https://www.banggood.com/AC-or-DC-Power-Supply-ESP8266-WIFI-Four-way-Relay-Module-ESP-12F-Development-Board-Secondary-Development-p-1794113.html
It is designed to just clip closed, so no need for screws or similar. To open once it's closed, you can use a screw driver in the small slot opening to disengage the clips.
This is a really cool relay board that works with esphome (https://esphome.io/), a pretty cheap and easy way to control 4 different things from one device :)
I printed up using 0.2mm, however you should be good with larger layer heights. You may need to use the ‘detect thin walls’ settings in your slicer so that the thin divider wall is printed correctly.