1 / 4
Beech T-34 Mentor Canopy Spacer Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Beech T-34 Mentor Canopy Spacer Clamp
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Simple Beech T-34 Mentor spacer clamp to keep the canopy open in flight. Folds out of the way when not in use.
I used this spiffy knob https://www.printables.com/model/318608-m6-knob
BOM:
- 2 6mm nuts (or 4 if you want a lock nut as in the photos, not needed if you use a rubber spacer)
- 2 6mm well nuts or rubber spacers
- 2 6mm bolts, 25mm and 40mm in length.
Printing:
- 5 perimeters
- 25% infill
- pause at 15.80 height to add the captive 6mm nuts in the T34Canopy.stl
- I used PETG-CF but use whatever is kinda strong and not brittle.