Letter punch Festool guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You will be able to punch letters in a straight line. Also you can measure the spaces between letters with the ruler :)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Hey there, this is a simple guide for any size of punch letter. This model has 4 lines as shown
in the picture below.
It also has a ruler measuring 5mm of space between letters:
Here i show you how to use it:
There are two models, one for the Festool workbench that fits with two pins into the table slots.
And another for any workbench, this model needs to be fixed with two screws to the table.
Of course you can hold it with clamps too.
This green extension guide is optional but i higly reccomend it!
There are some things to take into consideration regarding to this print. First, the orientation, it needs to be printed as shown:
And then for the ones who dont have a multi material unit (like me) you can easily print it by opening the .STEP file in prusaslicer and selecting the following configuration:
Then you just have to slice but take into consideration to take out the brim or not printing it. You have to print the green details first and then select the black body as “part” repeating the process and selecting negative volume to the green details. This way yo have 2 gcodes. Also yo have to lift Z axis 1.2mm as shown here:
Remember that all green parts are optional.
If there is any question i will be glad to answer! hope you like it and happy printing!