S&W SD40 VE LOW CAPACITY Magazine Base Plate
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.59 – €0.72 net (excluding VAT)
For file: 40 S&W Magazine Base Plate_0.4n_0.2mm_PLA_MK4_42m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.65 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 42.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
S&W SD40 VE LOW CAPACITY replacement magazine base plate.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 28
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I made this base plate to replace a broken one on my S&W SD40 VE LOW CAPACITY.
Print it on the “nose” of the part with PLA+ for best strength.
Use organic (tree) supports to support the hole.
.2mm layers
.4mm nozzle
15% infill
2 walls
5 top/4 bottom