Anchor Coat Hook
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.87 – €1.06 net (excluding VAT)
For file: Anker_voll05_0.15mm_PLA_MK3S_1h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.97 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 1.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Coat hook in an anchor design matching all apartments around harbor areas!
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 217
- Makes
- 3
- Views
- 868
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my first own print on my new Prusa MKS3+.
The idea was to design a coat hook matching our beautiful harbor in Hamburg, Germany.
I made different versions, but the one published is the best one in my opinion. You can clamp the hook onto the head of a screw with a chamfer (see the picture). So the screw is not visible anymore and the anchor comes right out the wall/board. The setup is quite stiff when the screw is deep enough in the wall and the clamping force is high enough.
There are very few supports that can easiliy be removed with pliers. It also works without any supports but it makes the opening a little nicer this way.