Krytka a držáček na čip / chip cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: Cip_0.4n_0.15mm_PLA_MK4IS_7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Krytka (držáček) na klasický čip průměru 30 mm. Cover (holder) for a classic chip with a diameter of 30 mm.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 34
- Makes
- 2
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Jedná se o krytku (držáček) na klasický čip průměru 30 mm, který je využíván na otevírání dveří, čipy jídelen apod. v případě, kdy se zlomí původní část s otvorem. Čip je nutné ne tomto místě zbrousit.
This is a cover (holder) for a classic chip with a diameter of 30 mm, which is used for opening doors, canteen chips, etc. in case the original part with the hole breaks. The chip must be ground.