1 / 9
IKEA Küche: Abtropfschale - Drain Tray - KILSVIKEN — image 1
1 / 9

IKEA Küche: Abtropfschale - Drain Tray - KILSVIKEN

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ich habe in Fusion360 eine Abtropfschale entworfen, die auf meine Küchenzeile zugeschnitten ist.

Rating
0 / 5
Likes
14
Downloads
52
Makes
0
Views
479
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Hintergrund:

Jeder kennt das Problem: Wasser spritzt beim Abwasch oder Abtropfen von Geschirr auf die Arbeitsplatte und kann insbesondere bei furnierten Oberflächen zu unschönen Schäden führen. Genau dieses Problem wollte ich in meiner IKEA Küche lösen.

 

Die Herausforderung:

Meine Arbeitsplatte (IKEA VRENA) ist aus Holzfurnier und somit anfällig für Wasserschäden. Direkt neben dem Waschbecken (IKEA KILSVIKEN) ist nur wenig Platz bis zur Wandabschlussleiste (IKEA HANSBYN). Eine herkömmliche Abtropfschale passte hier nicht.

 

Die Lösung:

Ich habe in Fusion360 eine Abtropfschale entworfen, die auf meine Küchenzeile zugeschnitten ist. Der Abstand zwischen Waschbecken und Wandabschlussleiste beträgt bei mir 113,6 mm. Dieser Wert ist im Modell als Parameter hinterlegt und kann (zumindest teilweise) angepasst werden (siehe Screenshots). So könnt ihr die Schale an eure individuellen Bedürfnisse anpassen.

 

Features:

  • Maßgeschneidert: Passt sehr gut zu IKEA KILSVIKEN Waschbecken, VRENA Arbeitsplatte und HANSBYN Wandabschlussleiste.
  • Parametrisierbar: Der Abstand zwischen Waschbecken und Wandabschlussleiste kann angepasst werden.
  • Wasserschutz: Die Schale ist so konzipiert, dass Wasser nicht auf und unter die Arbeitsplatte gelangen kann - jendenfalls thoretisch

Wichtige Hinweise:

  • Prototyp: Dies ist ein erster Prototyp. Design-Fehlerchen können nicht ausgeschlossen werden.
  • Wanddicke: Beim Druck sollte die Wanddicke erhöht werden, um Wasserlecks zu verhindern. Ich teste aktuell, ob die derzeitige Wanddicke ausreichend ist. Seid also vorsichtig!
  • Breite: Die Breite der Abtropffläche ist aktuell nicht parametrisierbar, da mein Drucker eine begrenzte Druckhöhe hat.
  • Amateurarbeit: Ich bin noch ein Amateur in Fusion360! Das Modell hat sicherlich noch (viel!!!!) Optimierungspotential. 😉

Verbesserungen erwünscht!

Ihr könnt das Modell gerne anpassen und verbessern! Ich würde mich freuen, wenn ihr mir eure optimierten Versionen zurücksendet, damit ich lernen kann. 😊

 

Fazit:

 

Die Abtropfschale passt in meinem Fall gut und bietet ausreichend Spiel. Besonders am Waschbecken habe ich darauf geachtet, dass kein Wasser auf die Arbeitsplatte kriechen kann.

 

Ich hoffe, dieses Modell hilft euch, eure IKEA Küche vor Wasserschäden zu schützen!

 

 

EN:

Background:

We all know the problem: Water splashes on the countertop when washing dishes or letting them drip dry, and this can cause unsightly damage, especially on veneered surfaces. This is exactly the problem I wanted to solve in my IKEA kitchen.

 

The Challenge:

My countertop (IKEA VRENA) is made of wood veneer and therefore susceptible to water damage. There is only a small space next to the sink (IKEA KILSVIKEN) before the wall trim (IKEA HANSBYN). A conventional drain tray didn't fit here.

The Solution:

 

I designed a 3D-printed drain tray in Fusion360 that is tailored to my kitchen counter. The distance between the sink and the wall trim is 113.6 mm in my case. This value is stored in the model as a parameter and can be adjusted (at least partially) (see screenshots). This allows you to adapt the tray to your individual needs.

 

Features:

  • Custom-fit: Fits very well with IKEA KILSVIKEN sink, VRENA countertop and HANSBYN wall trim.
  • Parametric: The distance between the sink and the wall trim can be adjusted.
  • Water protection: The tray is designed to prevent water from reaching the countertop - hopefully..

Important Notes:

  • Prototype: This is a first prototype. Minor design flaws cannot be ruled out.
  • Wall thickness: When printing, the wall thickness should be increased to prevent water leaks. I am currently testing whether the current wall thickness is sufficient. So be careful!
  • Width: The width of the draining area is currently not parameterizable because my printer has a limited printing height.
  • Amateur work: I'm still an amateur in Fusion360! The model certainly has room for improvement. 😉

Improvements welcome!

Feel free to adapt and improve the model! I would be happy if you send me your optimized versions back so I can learn. 😊

 

Conclusion:

The drain tray fits well in my case. I paid special attention to the sink to ensure that no water can creep onto the countertop.

I hope this model helps you protect your IKEA kitchen from water damage!

Tags