Arrow Puller
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.64 – €2.01 net (excluding VAT)
For file: ArrowPuller_0.4n_0.2mm_PETG_MK4IS_1h32m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.82 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 1.53 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is inspired by Double D’s Archery arrow puller. Works with both my 4mil arrows and larger 6.5mil arrows.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 48
- Makes
- 1
- Views
- 555
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
I printed this out of PETG for some added strength and added some foam inserts to grab hold of the arrow. I use it on my 4mil and 6.5 mil arrows but it should work with any size. For the pin in the joint, it’s just long enough to reach both sides with a little excess and then I soldered it to the outer part of the hinge so it does not come apart.
Note: it does require some sort of foam insert to grab the arrow properly. I used some dense black foam from floor pads. I have included an insert to be printed separately out of TPU if you choose to go that route, but I can't guarantee how that will grip the arrows because I haven't tested it. I recommend cutting your own foam for it, but the insert is there for those who want to try it.