Sparrow Scout RC Plane - Ugly Cousin to the Slow Stick - FPV
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by the Carbon Arrow Slow Stick but with a high parasol wing and a pusher format. Classic Ultralight Plane.
- Rating
- 5 / 5
- Likes
- 53
- Makes
- 1
- Views
- 3,202
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Standard Digital File License
The Sparrow Scout is inspired by the Carbon Arrow Slow Stick but with a high parasol wing and a pusher format. Classic ultralight design for FPV, beginner, and experienced pilots.
Features:
Dual Carbon Fiber Arrow Shaft
Steerable Tail Wheel
Bolt-on Wing and mounts
DJI Camera Platform
3D printed body parts including Wheels and Tires (TPU)
Aluminum Landing Gear
PDF files for Wings, Body, and Tail (Tiled PDF for A4 and US LETTER)
All up weight with 2200mAh 3S pack is about 980g -- this includes full FPV system, OSD, GPS.
List of additional parts can be found here:
Two sheets of 5mm Foam Board
Motor 1120KV - D2836 Brushless: https://amzn.to/427xG5n
ESC - 30A with 3A BEC: https://amzn.to/3ODN95O
Propeller - 8x6 E prop: https://amzn.to/40raYEm
Servos - MG90D Digital metal gear: https://amzn.to/3weywzB
3S 2200mAh Lipo battery
Camera - DJI Vista / Link: https://amzn.to/49ryz9t
Goggles - DJI FPV Goggles: https://amzn.to/49ryD9d
Carbon Arrow 7.5mm OD - 340 - 32 inch: https://amzn.to/4gvHr2R
Aluminum Landing Gear: https://amzn.to/40bWKpz
Nuts and Bolts
¼-20 x 1 inch nylon bolts for wings with nuts
4-40 x 1 inch screws for leading edge to use as wing pegs (or 1/8 carbon)
Collar for steerable wheel: https://www.dubro.com/products/nickel-plated-dura-collars?variant=27880684423
3mm or 1/8" Carbon fiber tube for Main wing leading edge and trailing edge: https://flight-model.com/products/10pcs-3mm-diameter-500mm-length-carbon-fiber-rods-matte-surface?variant=35612287631525
EZ-Connectors: https://amzn.to/3WaOmp8
Optional 180 degree digital servo for camera pan: https://amzn.to/3PqgLDP
Colored Packing Tape: https://amzn.to/4jf8nVa
3M 25mm long nylon bolts: https://amzn.to/4jyWv0o
3M nylon nuts: https://amzn.to/3CpkRZN
Printing Settings:
I used Overture Matte PLA: https://amzn.to/3wxdw7p
3 wall layers
35% in-fill
0.2mm layer height
Some Parts print best with supports but not required
Please note that each printer may print slightly different. It is a good idea to print one part to test the fit on the carbon arrow. The parts should be snug but able to move with pressure. You do not want them loose or sliding around. If needed apply scaling when you slice the parts. You can always add a dab of hot glue to secure a loose piece.
Use the full length of the recommended Carbon Fiber Arrows (31 inches) – no need to cut them down. Most of the parts placement is determined by their location on the arrow shafts. The nose piece, battery tray, landing gear plate, and front wing mount will all be touching. Use the photos and video as reference for placement. As with all Slow Sticks, you can move things around to your liking or as CG may dictate.
*Please reach out with questions. I would love for you to share your makes here.
Thank you!