Eurorack Case - 168HP 10U - Designed for Jaspers Stands
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a eurorack case I designed to be used with 3 Topobrillo Eurobus power supplies and a Jaspers synth stand.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is designed to be used with a Jaspers synth stand, as such it is angled at 30º so that it can sit vertically when mounted.
There are holes in each 3U row for a Topobrillo Eurobus power supply, and 3 different style of covers for the endcap where power switches and ports can be added.
Each segment screws together using m3 nuts and bolts, with slots fitted for nuts in an effort to be less fiddly. There are alignment pins near the slots for threaded inserts. I designed it with a threaded strip in mind, but sliding nuts should work just as well depending how clean your print fits together.
Most screws should be m3x8, though some of the back ones need to be longer (12mm iirc). You likely don't need all of the screws, but I figure this many modules and better safe than sorry.
Uploaded at the request of a commenter on a youtube video of mine, so just putting the STEP file up as they plan to edit it.