socket frame side shelf - parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small shelf to a socket without using screws. Fully parametric, Onshape link is included
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
The supplied STL/step is made for:
- A square socket with sides of 78mm and a corner radius of 5mm.
- The shelf length is 90mm, depth is 25mm, thickness is 4mm.
The ring slides around the outside of the socket with a friction fit, no glue, tape or screws needed.
The model is fully parametric and can be easily adapted by changing the parameters in Onshape (account is needed = free). The parameters/detailed dimensions are shown in the pictures.
(to export the step/stl file of the adapted model after changing the parameters in Onshape, just right click on Part1 and select "Export")
A step file is included to make small modification easy.
The Onshape link can be found by downloading the text file
Printing: Using PLA or PETG is sufficient. A mouse ear at the end of the shelf or a brim could be added if the build plate adhesion is not sufficient. No supports are needed.