1 / 3
Gallagher TurboStar horses insulator replacement clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement clip for the Gallagher TurboStar horses insulator.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I made this model to replace the lost or broken clips for the Gallagher TurboStar horses insulator.
The replacement does not have the rubber inset but it still works with the rubber on the other part.
Printing recommendations:
- Material: PETG (recommendation); PLA (alternative)
- Layer Height: 0,2mm (recommendation)
- Orientation: Flat (The hinge part will break if printed on the side)
- Support: Everywhere (Snug)
- Infill: 20% (3D Honeycomb)