1 / 3
Low Profile sliding DIN Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to slide onto a DIN rail and offer a low profile approach to mounting your hardware
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
slides onto your DIN rails for easier use and attachments
I like to reverse my attachment pieces so the screws are on the outside of the board so you can easily mount this to the slide rails.
You can use existing mounting pieces and drill a 3mm hole into the existing 2mm ones and with this model you can use 8-12mm self tapping screws, they should be just long enough to exsert pressure onto the DIN to secure them into place.
- 8mm self taping use 4mm
- 10mm self taping use 8mm
- 12mm self taping use 8mm
If using the DIN printable version supports are recommended along the upper extrusions