1 / 3
Small Box with Compartments
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This is a sturdy, but relatively lightweight box to store small parts e.g. screws. It has ten compartments in the standard configuration.
Print with normal supports enabled and adjust the infill. I recommend 25% rectilinear, because it works nicely in tighter areas. This was printed with PETG, but other filaments should work just fine.
Note: The assembly can require some force.