1 / 4
Autodarts Bottleholder Flaschenhalter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bottleholder with the autodarts logo on it. With the devider you can put some darts in it as well.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 498
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a bottleholder with the autodarts logo on it.
You can screw the back part into the wall/backboard and slide in the holder. detach it by pushing it upwards.
one model is with a logo slightly moved outwards and the otherone is an offset to the inside. if you the second one you can print the attached logo and glue it onto the holder. If you heat the logo a bit with a heat gun or a hair dryer, you can band it onto the holder, which makes the gluing much easier.