1 / 6
TRAXXAS UDR ULTIMATE DESERT RACER MUDFLAP UPGRADE — image 1
1 / 6

TRAXXAS UDR ULTIMATE DESERT RACER MUDFLAP UPGRADE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Nice clean bolt on mudflap brackets, mudflaps and mudflap retainers. All screws, no gluing. M3x12 work great.

Rating
5 / 5
Likes
10
Downloads
68
Makes
1
Views
416
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Nice clean bolt on mudflap brackets, mudflaps and mudflap retainers. All screws, no gluing. Although you can use your imagination or what you have lying around and still make these great. I've included STEP versions of the files if you wanted to make adjustments for yourself.
These do not take up much printing filament or time at all.

Everything prints very easily. Use tree supports on the main braces just lay them on their side.
It's easiest to put the mudflaps on the bracket prior to mounting to vehicle. I added provisional holes to fit your 3mm Allen driver through.
I used M3x 12mm length screws to assemble. You can get creative however. Holes are tight enough I do not have to use nuts when printing with ASA an have had no splitting. If you want, just drill them out and put nuts on the back.

I have included a "Blank" Mud Flap as well as one with lettering. I printed them in TPU 95A hardness. Softer would be alright, or even cut your own out of something

The parts can be printed out of PLA, PETG, heck TPU if you want.

Tags