1 / 1
Eufy 3C (S300) housing — image 1

Eufy 3C (S300) housing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Housing for eufy 3C (S300).

Rating
0 / 5
Likes
2
Downloads
74
Makes
0
Views
304
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Housing for eufy 3C (S300). Based on TTR's housing for eufy 2C. This is the extended version that provides better rain/sun protection, but the top corners might show a bit in the image, depending on how you print/install the housing.

There are three ways to print/install the housing.

  1. If you print as is, there is a cube modifier to cut out space for the thumb screw. Simply push the camera into the housing, and then install like normal.
  2. You can also delete the modifier but then you will have to either remove the thumb screw completely and push the camera into the housing, and then screw the housing and camera on, or 
  3. install the thumbscrew in between the screw base and the housing and then push the camera into the housing and screw it on. In this case the camera will protrude from the housing a bit.