HSW Piler Holder 5x with Countersunk Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plier holder with 5 slots compatible with HSW. Optionally can be screwed into the wall to use as an anchor.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 5-slot small-type plier holder to be used with the Honeycomb Storage Wall (HSW) system. Great for side cutters, needle nose pliers, and similarly sized tools.
Provides a countersunk insert, which optionally can be screwed into the wall to use as an anchor for HSW panels. Typical use of this model does not require a screw. Access holes are provided for access to the screw hole and are otherwise not used.
If you scale or otherwise modify this, be sure you keep the HSW connector itself in its current size.
Prints flat on the bed, no supports are required for standard filament.