1 / 5
IKEA LEDBERG Desk/Plant Lights - Remix and fix for Dioder L1327 multicolour lights — image 1
1 / 5

IKEA LEDBERG Desk/Plant Lights - Remix and fix for Dioder L1327 multicolour lights

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed the lamp to mount Dioder L1327 multi-colour led lamps. New mount for lamp, to mount, remove the metal mounting…

Rating
0 / 5
Likes
4
Downloads
10
Makes
0
Views
434
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Remixed the lamp to mount Dioder L1327 multi-colour led lamps.

  • New mount for lamp, to mount, remove the metal mounting plate, then snap the lamp in the mount. (The pivot point should point toward where the metal plate was, photo will follow soon)
    To-do: the mount is a little loose, need to tighten it up a bit so the light does not fall out as easily. (It does not in normal use, but whit a heavy nudge, it will)
  • Widened the channel for the cable; the Dioder has 4 wire cable, requiring 6.5 mm wide channel
    To-do: The connector needs to fit "under the bridge" as well, will have to re-invent this as the current method would result in a very weak bridge. The rest of the files are not included here, please see the remix-base for those.

    https://www.thingiverse.com/thing:4678639

    Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2 (dynamic layer height .1-.2)

Infill:

40%


Filament:

Real PLA Glow in the dark (because; why not)

Notes:

Additional required hardware;

5x M5x20 bolt with a hex head (not a round hex-socket head but an actual hex head) + 5x M5 nuts.

OR

5x M5x25 bolt (any head) + 10x M5 nuts.
In this case, screw a not on the bolt, insert it in the knob, push trough the hole in the parts, nut on the other side.

Category: Decor

Tags