1 / 2
Corner Shelf - small
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Perfect for displays, wifi hubs, thermostats, lego...just about anything you need a small corner shelf for.
- Rating
- 4.5 / 5
- Likes
- 11
- Downloads
- 112
- Makes
- 2
- Views
- 333
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Small corner shelf (4x4inches) and can be stuck on the wall using command strips.
Perfect for a wifi thermostat / hub / mesh tower / camera.
Has a passthrough hole at the back so you can feed wiring through neatly and on v2, larger passthough & M5 holes to screw it to a wall for extra support if you want.
- Printer: Creality Ender 3 V3 SE
- Nozzle = 0.4
- Quality = 0.2 ‘Standard’
- Medium = Bambu Charcoal PLA+
- Inner wall speed = 105
- Print Speed = 200
- Outer wall speed = 105
- Top/Bottom speed = 105
- Infill = 20% Grid subdivision or Lines
- Print Temp = 200c
- Print Bed Temp = 65c
- Print Time = 1 Hours 55 Minutes.
- Support = No
- Brim - No
- Ironing = No
Can be mounted either way.
11/01/25: Version 2 - Increased passthrough hole & added screw holes.