Andrew-Barclay Tank Engine Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a little toy tank engine! No glue or screws either, it just snaps together! (Also, this is a toy, not scale!)
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 40
- Makes
- 1
- Views
- 278
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Share Alike
It's just a not-scale Andrew-Barclay 0-4-0. Nothing more to say other than what was up there.
Want some rolling stock? Here A 7-plank truck!
For use on wooden railway track, scale it 133.7%
Update Jan 14, 2025: Redid all the files to fix numerous errors, (Upside-down couplers, too-thin chassis plate, funnel bores not lining up) and make the clips symmetrical.
Update Jan 17, 2025: Added 3-Color .OBJ for multi-color printers
Update Jan 30, 2025: New more secure coupling design installed after discovering old couplings were prone to detaching.
|| BUILDING INSTRUCTIONS ||
The included photos are REALLY useful!
- Take a clip, and insert it into the back of the cab, (Square windows) and the other end into the body. (Tanks, dome, etc.)
- Take two clips, and thread the one end though the running board (Boxes) middle plate (pistons/cylinders) and bottom plate, (Text side down) in that order. (Use images for reference) This will be quite loose! Don't worry, we'll fix that.
- Attach the body onto the lower/chassis block, ensuring the clips are aligned. (The cab goes over the centered block on the running board) Again, use the images to help!
- Take the funnel and push it into its slot. Depending on your tolerances, this might take a little sanding or glue.
- Snap on the wheels, and you're done! Enjoy your little tank engine :)
(Yes, it has knuckle couplers. Yes it should be chains, but it's a toy)