Robland X31 or HX310 Planer to 4" hose Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adaptor to replace original hose nozzle
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I printed this hose adaptor from TPU with a 1.0 Nozzle and .2 layer height.
I would recomend printing with whatever nozzle size you are comfortable with.
It requires no support and I printed it round end down and would recomend this orientation.
I would recomend a stiffer TPU if you can find it. Mine was 98A I believe.
Instilation,
Step one you will have to “chisel” out the old adhesive as best you can.
Secod you will have to compress the adaptor severly to make it fit into the planer.
It will be a little loose but should fit in snugly enought to not fall out.
Lastly the short edge goes towards the top when hood is in jointer posistion like the pictures.
Good Luck
I do plan on making a slightly wider version to fit more snugly in the near future if you wish to wait.
Enjoy.