ThinkPad 65W Slim Power Brick Holder - Multiboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I use this power brick for a bunch of purposes, so I figured I'd mount it to my multiboard!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this power brick for a bunch of different things from powering my custom PSU to my Pinecil. Its a bit annoying with its long cables and I found that it just got in the way on the table. Since I made my multiboard I figured I could mount it there, and here we are!
Print should be oriented in this way:
Make sure to print 3 retaining clips (or more if you're using it for something else). Ensure that their print orientation is as such or else this will break (ask me how I know).
Enjoy!
Edit (6/17/25):
After a while the quick connects I used started to fail and just didnt grip as much. I re-did the design to use multiconnect. Print it in whatever the auto-orientation prints as, it should be strong enough in any orientation. The required multiconnect mounting points are included in the downloadable files.