Dust collector elbow adapter - 1.5" to 2.25"/2.5"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an elbow adapter to attach a shop vac 2.25" hose (labelled as 2.5") to a 1.5" dust collector on a DeWalt DW703
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 165
- Makes
- 0
- Views
- 1,304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
As you can see from the picture I have limited space between the back of my miter saw and the wall. The dust collection adapters I could find didn't quite fit into that space. So a quick bit of modelling and three test prints later I finally have an adapter that works for my space.
You're going to need supports for this one. I've included a .3mf file that when loaded into Prusa Slicer should give you paint-on supports that worked for me.
I'm using this for a DeWalt DW703 miter saw but it should work for anything with a 1.5" dust collection port. It's going to a 2.25" shop vac. Yes, Rigid calls the hose a 2.5" hose but the actual measurement is 2.25". I have no idea what they're trying to do there.