1 / 3
Pipe Load for the Turbo Racing 1/76 scale RC C50 Semi Truck — image 1
1 / 3

Pipe Load for the Turbo Racing 1/76 scale RC C50 Semi Truck

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An alternative load for the trailer of your Turbo Racing 1/76 scale truck

Rating
0 / 5
Likes
10
Downloads
43
Makes
0
Views
913
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Here is an alternative load for your Turbo Racing 1/76 scale C50 semi truck.
The pipe load makes an attactive alternative to the container or empty trailer options that are supplied by Turbo Racing.

All parts were printed in PLA using:
Layer height 0.2 throughout
2 perimeters
4 top and bottom layers
15% infil
No supports
The attached .3mf files are those I used on my Prusa Mk3S+ printer.

Print the pipes standing vertically and you can add a colour change for the protective end caps of the pipes.  Drop a M10 steel full nut into the cutout to match the nose weight supplied with the Turbo Racing box container.  I used a small piece of Blue Tack (poster putty) to stop the nut rattling, and then add a narrow strip of double sided tape to attach the pipes to the trailer.

The tie down straps simply clip into place over the pipe load and trailer bed.  I have included two versions of the straps.  Version 1 is exactly the right shape, while Version 2 printed a bit neater on my printer.  If you use Version 2, cut the centre section of the strap out using a pair of side cutters to match the Version 1 strap shape.