Rugged Weather Proof Case for Sonoff SNZB-04P Door/Window Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Outdoor case for Sonoff SNZB-04P door window sensor and the magnet.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 146
- Makes
- 0
- Views
- 852
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
It can be printed with 0.2mm layer height and with no supports, no need to rotate the models.
Remove both the sensor and magnet from their original cases. Keep the screws holding the sensor PCB to the case as they will be used later.
Push the magnet into the hole in the magnet case and fit the lid using a M3x8 screw.
Push the sensor PCB into the sensor case battery end in first and facing upwards. Secure the lid using the screws you removed earlier.
I'd print all parts using PETG or better. A light colour will help show the LED through the body.
Update 25.01.12: Made some minor changes to the sensor cover to give it better protection from water.
Update 25.07.27: Made some changes to the internal dimensions and the notch position. Also added a shorter magnet holder.