shop vac to 2 inch PVC coupling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified a previous model to attach a shop vac to pvc pipe for small shop dust collection.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I modified a hose coupling that was slightly too large to fit the standard 2.25 inch shop vac hoses. I made both inner and outer hose couplings that go on the outside of standard 2 inch pvc pipe.
Metric dimensions
58mm-60mm (inner-outer)
58mm-60mm (outer-outer)
these dimensions are for the inner tolerances. (the dimensions of the hose/pipe you will be attaching to.
Printing
I printed with 6mm nozzle but I'm sure 4mm will work just fine. I used 0.3 mm layer height, 0.65 mm layer widths. Sliced in cura. Due to the thin nature of the print I recommend printing with bed adhesion such as 6-8 layers of brim, as well as hair spray.
Please reach out if you have any questions.