Little Rocket Attachment for 16mm OD Aluminum Barrels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches to 16mm nerf blaster barrel and allows you to use Little Rocket attachments to shoot multiple ammo types.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 40
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Never be without a way to shoot that special ammo type ever again! This attachment allows for dart pass-through so that you can use your blaster as normal without anything attached. Better yet, why not pair it with the Out of Darts printed Little Rocket PCAR?
I recommend printing this in PETG with a brim and no supports. I used two perimeters with a 0.6 nozzle, making the wall thickness effectively 1.4mm. Three perimeters with a 0.4 nozzle should be sufficient. When I tried printing this with thicker walls, the internal tolerances were out of whack and attachments were hard to get on and off.
You might want to lubricate the barrel nut so that it doesn't get stuck tightened down. I would also recommend not keeping this tightened on a barrel, as plastic creep will allow it to loosen over time. Even though this is a tapered thread, it may eventually loosen too much. Simply loosening the nut is adequate.
The only hardware needed is a 21x16x2.5 O-ring, which you can conveniently find at Out of Darts.