Raspberry Pi 3 (B+) / 4 Sleeve Case w/ CP2102 Holder + Wall Mount Bracket (e.g. for Optolink-Switch)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed Raspberry Pi 3 (B+) / 4 Sleeve Case to house a CP2102 USB to TTL breakout board. Slim design. Easy to print
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 753
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
This is a remix of the Raspberry Pi 3 (B+) / 4 sleeve case designed to accommodate a CP-2102 USB to TTL breakout board, offering a small & compact way to fit into a single case. While I created this model to house a Viessmann Optolink splitter, it can be used for any project requiring a CP-2102 breakout board. The holder / case is designed to fit a Raspberry Pi 3 and was tested with a 3 B+ board.
The main component of this print is the holder for the CP-2102 breakout board, which fits neatly over the RPi 3/4 display port (which thus becomes unusable). The holder was designed for a CP2102 board from AZ-Delivery, however with minor modifications it should fit any other breakout board as well.
For any remixed changes, the holder is fully compatible with the original case, which can be easily adapted by adding a hole for the breakout board’s USB connector.
Print & Assembly
Everything can be printed without supports, so fit everything onto a build plate and print it. Then assembly is as straight forward as the print:
1. Fit the breakout board into the holder:
2. Put the holder onto the RPi and fit the cables:
3. Squeeze everything into the sleeve case:
