DEPRECIATED (ITX MOBO - ATX PSU) Veloroza MAX 1 Pc case v1.5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cool pc case I made. Specs: Atx PSU, mini Itx Mobo, 3 2.5 inch ssds and 6 exterior fans to keep things chilly.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 63
- Makes
- 0
- Views
- 1,157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
WARNING THIS MODEL IS HORRIBLE AND DOES NOT WORK ANYMORE
This is a culminating event of a week of modeling and lots of coffee. This monster of a PC case is equipped with 3 , 2.5inch ssd mounting points, ATX PSU support, 6; 120mm exterior fan mounts, 2.5 slot PCIe slots, and plenty of room for cable management! The power button is a 7mm normally off pushbutton that you attach to the F_panel port on the MoBo. A bed size of 256x256x256mm is needed to print all pieces with out spitting, supports are required. Was originally printed on a Bambu Lab A1. PLA , PETG, or ABS are my recommended filaments.
STATS:
3, 2.5 inch ssd mounting ports
ATX PSU support
6, 120mm exterior fan mounting ports
2.5 slot PCIe slots
full height GPU
ITX motherboard support
REQUIREMENTS (what your printer must have / assembly materials)
PLA, PETG, or ABS filament
256x256x256mm build plate
11 Standard fan screws (the screws that come with fans) NOT AIO SCREWS (but you can use them wile mounting the fans
8, 2x8mm magnets
7mm normally open pushbutton
More instructions to come! :)