1 / 1
Baby Bouncer Toy Bar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bar to hold baby toys. Attaches to common baby bouncers.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Design for a baby bouncer toy bar. Modelled after the Baby Bjorn version.
A little more involved than just printing but worth it in the end.
Materials needed
- 20in or 500mm of 0.1875in or 5mm steel round bar
- Two printed end caps
- Two printed bar retaining clips
Assembly Instructions
- Make a groove all the way around the bar located about 0.25in or 5mm from both ends of the bar. I used a hacksaw.
- Bend the bar into shape
- I made two ~80 degree large bends about 4in from each end of the bar
- I made two smaller ~20 degree bends about 1.5in from each end of the bar
- (Optional) Add toys to the bar
- Fit the bar into the end caps
- Snap the retaining clips in place