1 / 1
Mario pipe planter - Multicolor no AMS, self watering (wick required)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mario warp pipe planter that uses self watering wicks to control watering. Multicolor brick/mortar without AMS
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 68
- Makes
- 1
- Views
- 415
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mario warp pipe planter that self waters using a bottom reservoir and cotton wicks. The brick base and mortar are printed separately, so you can do multicolor without using wasteful AMS. Recommended to use a little glue for the mortar if it's too loose.
I've included some variants of the pipe and planter. Let me know if you want a version of the base without the watering funnel, or any other variants.
Important notes:
- The base should print with ≥3 walls, or else water may leak through. The pipe can use 2 walls, and the mortar can use whatever.
- Be careful using the sunken base variant, as the pipe extends into the reservoir. If you add too much water, it may lead to root rot.