1 / 5
Tonie figures star wall shelf for up to 6 Tonies with glow in the dark effect — image 1
1 / 5

Tonie figures star wall shelf for up to 6 Tonies with glow in the dark effect

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tonie figures star wall shelf for up to 6 Tonies with glow in the dark effect.

Rating
4 / 5
Likes
14
Downloads
49
Makes
1
Views
322
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Tonie Figuren Stern-Wandregal für bis zu 6 Tonies mit glow in the dark effekt.

English description below

Ich habe dieses Stern-Tonies Regal für meinen Sohn konstruiert. 
Ich habe beim Stern 1mm Höhe mit einem Glow in the Dark Filament gedruckt und dann auf die Farbe gelb gewechselt. Kann auch nur in einer Farbe gedruckt werden. Auf der Rückseite in ein Schraubenhaken konstruiert für eine Standard Holzschraube max. Ø4mm.
https://amzn.eu/d/eEjo4SX

Im Tonies Brett sind 2 Stück, M4 Kotflügelscheiben nach DIN 522, mit Druckpausen eingelegt. 
1. Pause bei Layer 12 (2,4mm)
2. Pause bei Layer 27 (5,4mm)
Schichthöhe 0,2mm
Die Kotflügelscheiben können normalerweise bei jedem lokalen Baumarkt gekauft werden. 
https://amzn.eu/d/hqW5hEq

d1=4,3mm 
d2=20mm
h1=1,25mm

 

 

 

 

 


Wenn dir mein Design gefällt bitte like es, booste es und poste ein Bild deines Druckes. 

Viel spaß damit und schau dir auch meine anderen Tonies Regale an :)

-------------------------------------------------------------------------------------------------------------

Tonie figures star wall shelf for up to 6 Tonies with glow in the dark effect.

I designed this star Tonies shelf for my son.
I printed the star 1mm high with a glow in the dark filament and then changed to the color yellow. Can also be printed in just one color. On the back there is a screw hook designed for a standard wood screw max. Ø4mm.

https://amzn.eu/d/eEjo4SX

The Tonies board contains 2 pieces, M4 fender washers according to DIN 522, with print breaks.
1. Break at layer 12 (2.4mm)
2. Break at layer 27 (5.4mm)
Layer height 0.2mm
The fender washers can usually be bought at any local hardware store.
https://amzn.eu/d/hqW5hEq

d1=4.3mm
d2=20mm
h1=1.25mm

If you like my design please like it, boost it and post a picture of your print. 

Have fun with it and check out my other Tonies shelves too  :)

 

Tags